"Electronic platform scale" "Electronic scale" 500g, 200g how to adjust the number of grams steps and correction method?

Electronic scales are a type of weighing instrument, a tool that uses Hooke's law or the lever balance principle of force to determine the quality of an object. Electronic scales are mainly composed of 3 parts: load-bearing system (such as weighing pan, scale body), force transmission conversion system (such as lever force transmission system, sensor) and indicating system (such as dial, electronic display instrument). According to the structure principle, it can be divided into three categories: mechanical scale, electronic scale, and electromechanical combined scale.

When the electronic scale arrives in the user's hand, it basically needs professional operators to further calibrate to ensure the normal use of the user. In general, once there is a deviation in the accuracy of the electronic scale, the user needs to carry out Calibration, I don't feel too much trouble. At this time, you can check the "Instruction Manual of Electronic Scale", there will definitely be instructions to introduce the operation. In fact, this calibration is very simple, you can complete the operation according to the instructions of the electronic scale. If you come, then you can call the place where you bought the electronic scale and consult them.

Let me introduce how to use and correct the electronic scale, I hope it can help you ~

Insert the battery correctly according to the instructions of the battery compartment, and place the scale body on a stable and windless table.

1. Press the power button to start, wait for three seconds to display 0.0 or ******

2. Place the items to be weighed on the weighing pan and read the value after the value is stable;

3. Press the unit conversion key to change the weighing unit;

4. Press the power button to turn off the computer when it is turned on;

ON / OFF: switch on / off

PCS: Counting (After booting to zero, count a 25, 50, 75 or 100 sample template to be counted, put the counted sample template on the weighing pan and display the weight value. Press and hold the count to display 25, 50, 75 Or 100.

Press the unit selection key to select the previously counted sample quantity value and press the count key to confirm; at this time, PCS will appear in the upper left corner of the display. At this time, the same items that need to be counted can be added to count on the weighing pan.

TARE: peeled

1. Turn on the machine to zero; there is no item on the weighing pan but the display number (such as 0.1 or 0.03 or -0.01, etc.) can be pressed to return to 0.

2. Place the items to be peeled on the weighing pan;

3. Press the tare key (tare) to display 0.0 or ******, indicating that the weight has been deducted;

4. Then put the item to be weighed, the reading at this time is the net weight of the item)

UNiTS: Unit conversion (there are four units available for conversion).

4 units conversion, gram (g ordinary unit), ct (carat), oz (ounce), dwt (troy)

1ct / carat = 0.19997g 1oz / ounce = 28.3495g

1dwt / British dollar = 1.5552g 1ozt / Trouble ounce = 31.1034g

LIGHT: Blue luminous lamp

Correction method:

Press the UNITS key for 3 seconds, the display shows CAL to let go, press the UNITS key again, the scale shows 500.0 grams, at this time place 500 grams of weight on the tray, after 3 seconds display 500.0g, then PASS. Calibration completed . Turn off and turn on again. (Please use this function when weighing is not accurate due to excessive temperature difference or other reasons.)

note:

1. Take the tray protective cover lightly and use it in a stable, vibration-free and wind-free environment;

2. Please do not place any objects larger than the rated weight on the tray, as this may damage the sensor, please do not impact the weighing tray when placing objects, and handle it carefully;

3. When using this product, do not use a mobile phone within 50cm around the scale, as this will affect the use of this product;

4. When the display shows the battery symbol, please replace the battery immediately;

5. Please use this product in a 10-30 degree environment. Excessive temperature difference may cause measurement error. If the temperature difference is too large, please use a standard weight to calibrate this product before use. You must ensure that this product is in the same environment during calibration More than minutes

6. When the weight added to the tray exceeds the rated weight, the symbol "ERR" will appear.

Thank you very much for your attention to our products. If you have more questions about "Electronic Scales", please leave a message to the editor. We believe that we will do better with your suggestions and help!