Magnetic powder clutch and magnetic powder brake should be purchased with quality assurance products

When purchasing magnetic powder clutches and magnetic powder brakes, it is better to choose products with guaranteed quality, and do not make the magnetization before the start of the machine. Before the formal operation or after the device is moved, it must be operated evenly before it can be officially operated. Next, drive the side as fast as possible (below 1800rpm) for about 1 minute, then set the excitation current at the rated 1/4 to 1/5. On the other hand, turn the drive side. On the one hand, turn on during 5 seconds and turn off during 10 seconds. Intermittent magnetization about 20 times.

The magnetic powder brake and magnetic powder clutch cause the magnetic powder filling between the two groups of units to be scattered on one side during the transportation process or for a long time. During the overload protection, when the working system is accidental and the torque is overloaded, the clutch automatically slips. Protection of mechanical equipment and driving force, frequent separation, fast response, high frequency, up to 40-60 times per minute, can be widely used in fast working conditions and high frequency applications, good linearity, torque and excitation current in a wide range Proportional to the range, can be used as a linear adjustment element