The overall wardrobe purchase guide three tricks to see the quality wardrobe

[ Chinese wardrobe network ] In today's wardrobe market, the overall wardrobe continues to heat up, and is loved by consumers. However, consumers often have doubts about how to choose a wardrobe. Here, Xiao Bian deliberately starts from the three aspects of the panel, edge banding and veneer of the wardrobe, and teaches consumers to identify the advantages and disadvantages of the wardrobe.

Whether the board is environmentally friendly

The formaldehyde content of the board is the primary factor to consider when purchasing a wardrobe, as this is closely related to our health. When shopping, consumers can close the door and wait for about 5 minutes, then yank open the door and smell the nose with no smell. There is an odor indicating that the formaldehyde content may exceed the standard and is a poor quality product.

Is the edge sealing strict?

Some manufacturers have no professional equipment, and the production of the wardrobe products is rough, and there are obvious edge collapses around them. Some even cut corners and cut only the front side of the board. The unsealed surface easily absorbs moisture from the air, causing the sheet to swell, causing the wardrobe to deform and affecting the service life. Professional manufacturers use precision panel saws to cut sheets without cracking around the sheets. After sealing around, it can effectively prevent the moisture in the air from intruding into the interior of the board.

Whether the veneer is wear-resistant

The professional manufacturer uses the environmentally-friendly melamine veneer with thick thickness and high temperature and high pressure treatment, which has high surface strength, abrasion resistance and scratch resistance. Inferior wardrobes produced by unscrupulous merchants are selected from low-priced panels on the market. The surface is covered with Pauli paper and ornate paper sheets. It looks good. In fact, the wear resistance is poor, and it can be clearly marked with a fingernail. Scratches.

In short, a quality wardrobe is solid and reliable in terms of materials and workmanship. Consumers should pay attention to careful identification when purchasing.

Disinfection Machine Thermometer

The temperature measurement and disinfection integrated machine integrates automatic body temperature detection and automatic dispensing of hand sanitizer, which is more convenient and cost-effective. Compared with the face temperature measurement all-in-one machine which is greatly affected by the outdoor environment, it has stronger environmental temperature adaptability and can still be used normally in complex environments. Even if it is applied outdoors, it will not be affected by the surrounding environment. And affect the accuracy of temperature measurement

Wall Mounted Thermometer Hand Sanitizer, Spray Dispenser Automatic Sensor Thermometer, Hand Temperature Measurement Dispenser

Guangdong Zecheng Intelligent Technology Co., Ltd , https://www.zecheng-security.com