![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Range hoods have become an indispensable kitchen tool in modern homes. However, even the best tools must be cleaned from time to time. Otherwise, it will not only form grease stains over time, which will affect the kitchen ’s environmental hygiene, but also affect the use of range hoods. , So that the oil smoke is not easy to eliminate. Simple cleaning can not be handled, and can be cleaned with professional Fujia oil stain. But what is better to clean the cooker hood ? Let's take a look with the editor.
Most people are used to disassembly and cleaning when cleaning the range hood, which is a waste of time and easy to damage the machine parts. Now we introduce a cleaning method that does not require disassembling the machine and saves time and effort.
1. Take a plastic bottle (a variety of beverage bottles that can be squeezed by hand), poke more than 10 small holes in the lid with a sewing needle, then put in an appropriate amount of detergent, then fill with warm water and shake it evenly .
2. Start the cooker hood and spray the cleaning liquid with a plastic bottle filled with cleaning fluid towards the area to be washed. At this time, oil stains and dirty water can be seen flowing into the oil storage hopper, and then fall as soon as they are full.
3. After the cleaning solution in the bottle is used up, continue to prepare and repeat the cleaning. Until the outflow of dirty water becomes clear, depending on the degree of fouling, it can be rinsed off after 3 washings.
4. If the fan blade is equipped with a net cover, it is advisable to remove the net cover first to enhance the washing effect.
5. Wipe around the suction port, the surface of the cabinet and the lampshade with a rag.
Ways to prevent oil pollution in kitchen gas pipelines
Building users who use pipeline gas will encounter this situation: the oil stains attached to the gas pipeline are thick and difficult to remove. A precautionary measure is introduced: firstly, the oil stains drilled on the gas pipe shall be thoroughly removed, and then the paper strips (5 cm) cut from the waste calendar will be around the width of the gas pipe, which will be wrapped around the gas pipe. It is also very convenient to exchange the dirty paper.
Degreaser
After the range hood is used, the oil basin should be cleaned, and the plastic bag for sweet oranges can be placed in the oil box and pressed against the wall of the box. After the oil in the box is full, remove the bag full of oil and replace it with a new bag. This can not only solve the trouble of oil companies, but also use waste plastic bags, saving time.
The waste oil in the oil box of the cooker hood can be used. Many home kitchens now use the range hood, and the oil box is full of waste oil within a few days. Use it to remove stains on kitchen window mullions, ventilating fans and range hoods is the best "grease remover". Specific method: Use a rag or towel to dip the waste oil in the oil stain, then wipe the oil stain with the cloth, and then wipe it with a clean cloth. Thick greasy objects can be soaked in waste oil for a few seconds, and then wiped off with a cloth after the greasy dirt has softened (especially thick ones need to be scraped with a thin bamboo board.)
The oil in the oil hood of the cooker hood is available. The doors and windows are connected by iron hinges, which are often worn and opened and worn very often. A small wooden stick can be used to place the waste oil on the hinge shaft, which extends the life of the hinge and reduces noise.
Precautions
The range hood can be said to be one of the necessary household appliances in the modern family kitchen. The performance of the range hood and the convenience of use largely determine the quality of the air in the home and the health of the housewives, so it must not be ignored. If the range hood is used for a long time, the surface and the inner cavity will be filled with oil pollution, which affects its normal smoke exhausting effect. Therefore, the correct and proper cleaning of the range hood is a prerequisite for the normal operation of the range hood.
1. First cut off the power supply of the range hood to ensure personal safety.
2. The surface of the housing of the range hood and the net cover are scrubbed with a soft cloth dipped in a small amount of warm water with neutral detergent. Wipe dry with a soft dry cloth.
3. Disassembly and washing of the inner cavity of the wheel and volute:
(1) Loosen the screws of the grille cover and grille, and remove the cover and grille.
(2) Then loosen the fastening screws of the wind wheel and take out the wind wheel.
(3) Soak the removed parts in warm water with neutral detergent, wash with a soft cloth and wipe dry.
(4) Use a soft cloth with a small amount of warm water containing neutral detergent to scrub the dirt in the inner cavity of the volute, wash with a soft cloth and wipe dry.
(5) Install the above components in the reverse order of disassembly.
(6) After installation, check whether the oil path of the appliance is smooth and the sealing ring on the volute can be sealed.
4. Precautions for cleaning the impeller and volute:
(1) During cleaning, the motor and electrical parts must not be flooded.
(2) When cleaning, do not pull the internal connection forcefully, otherwise the connection point will be loosened, resulting in electric shock hazard.
(3) It is forbidden to use alcohol, banana water, gasoline and other flammable solvents to clean the range hood to prevent fire accidents.
(4) When cleaning, rubber gloves should be worn to prevent the sharp edges of metal parts from hurting people.
(5) The removed parts should be handled with care to avoid deformation. Special care should be taken when cleaning the impeller. Do not touch or move the counterweight of the blade. Otherwise, the whole machine will be vibrated and the noise will increase.
For those range hoods with a filter cover, because the fume has been filtered before entering the appliance, the internal structure does not need to be cleaned, and only need to clean the appliance shell and filter cover according to the cycle specified in the manual.
5. Cleaning the filter cover:
(1) Unscrew the screws securing the grille.
(2) Immerse the removed filter cover in warm water with neutral detergent for 5-10 minutes.
(3) Use a soft plastic brush to clean the dirt in the pores of the filter, and then dry it with a dry cloth.
(4) After installation, check whether the oil path of the appliance is smooth and the sealing ring on the volute can be sealed.
Relevant information about what to clean the cooker hood is introduced here for everyone, I hope this article is helpful to everyone. If you still do n’t understand something, you can leave a comment below, we will answer it as soon as possible.
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
Cooker hood
Puppy Shampoo,Flea Shampoo,Flea Shampoo For Dogs,Homemade Dog Shampoo
Jiangxi Welton Pet Products Co., Ltd. , https://www.weltonpetcare.com