Xenon lamp aging test box works

Xenon lamp aging test integrated climate box is a test device, in addition to weathering test, the light resistance test material may be high, i.e., a polymer material is exposed to simulated sunlight spectrum of artificial light transmitted through a glass material down Evaluation Lightfastness. Simulated and intensified experiments from light energy, temperature, rainfall or condensation, humidity, and other major climatic factors; using a xenon arc lamp capable of simulating the full sunlight spectrum to reproduce the destructive light waves in different environments; Xenon lamp weather resistance test The box can provide corresponding environmental simulation and acceleration tests for scientific research, product development and quality control. It can be used for the selection of new materials, the improvement of existing materials, or the evaluation of changes in durability after changes in the composition of materials; suitable for plastics, rubbers, paints , coatings, inks, paper, pharmaceuticals, food, cosmetics, textiles, auto parts, packaging materials, construction materials, electrotechnic products, etc.

Xenon lamp weather resistance test box equipment main technical indicators

Irradiation area: according to user requirements

Irradiation intensity: 550w/m2 (290~800nm)

Blackboard Temperature (BPT): 55°C~95°C

Humidity: Irradiation 10%~70% RH Darkness Up to 100% RH

Irradiation source: full spectrum xenon lamp (air-cooled)

Bright and dark cycle: 10min~99.99min

Rainfall period: 1min - 99.99 hours

Filter: Outdoor

Irradiation time: duration/period

Equipment use site conditions :

Temperature: 15°C~35°C

Relative humidity: no more than 85% RH

No strong vibration around, no strong electromagnetic field influence

No high concentrations of dust and corrosive substances around

No direct sunlight or direct radiation from other heat sources

There is no strong air flow around. When the surrounding air needs forced air flow, the air flow should not be directly blown onto the box.

The test chamber should be placed in a stable, leveled position.

There should be a certain distance around the test box to facilitate maintenance operations.

Installation site is well ventilated