How to decorate fir furniture

Generally, furniture is not made of pine and fir as the surface material, because these two kinds of wood contain oily ingredients. If the paint construction process is not well mastered, the ideal finishing effect cannot be obtained, and the decorative paint film is not easy to adhere and solidify, and there is a phenomenon of dryness and wrinkling.

In order to obtain a good effect on the decoration of fir furniture, we recommend:

1. The newly made fir furniture should not be painted immediately. It is best to put the white blank after one year and then paint it.

2. If the alkyd varnish is used as the top coat, the shellac can be used to make the base, and the insect glue liquid is fast drying and the sealing performance is good. Apply alkyd varnish finish and apply a little thinner during construction to dry out.

3, at the cross-section, you can first use the old powder, pigment and water to reconcile, with putty to make the base, then brush the two degrees of shellac, after drying, and then painted alkyd varnish once.

Preliminary finished fir furniture

Regarding the process of painting natural lacquer, firstly, the surface of the finished furniture is sanded with wood sand, and then the pigment is blended into a desired color to make a base color. After drying, mix the natural lacquer with gypsum powder and water, and thoroughly smear it. Use a horn knife to scrape the furniture once and dry for 24 hours. Then use 1, wood sanding, and remove the dirt on the surface of the furniture, and then paint it on the furniture surface with a paint brush and paint it evenly, and straighten it in the direction of the wood grain. After 48 hours of dryness Just fine.

The above description is for reference only and needs to be explored in practice.

Extended reading: the advantages and disadvantages of fir furniture

For weatherproofing/storage of pallet loads, or just for protection against dust, we can design the Top Sheet Dispenser to work with automatic Turntable wrapping system or rotary arm wrapping system. The dispenser spreads top sheets after pallet load is discharged from the Palletizer and enters the Top Sheet Dispenser. After covering the top sheet, the load is wrapped up so that it can be delivered to customer or storage room. The top sheet will protect the load from moisture and dirt.

FM Series Sheet Dispenser

Sheet Dispenser,Top Film Dispenser,Automatic Sheet Dispenser,Top Sheet Dispenser

Shandong Sinolion Machinery Corp. Ltd , https://www.packingline.nl