Treadmill run with how to do? How to debug?

In the process of using the treadmill, in addition to the situation where the treadmill running belt slides, there will be a situation similar to running belt running deviation. If the running phenomenon is not timely adjusted, it will accelerate the running. Loss of the belt; what to do if the treadmill runs away? How to debug? The following Xiaobian speaks his own opinion! 3

Why does the treadmill run away?

According to Xiao Bian observation, the cause of treadmill runaway is: the placement of the treadmill is not stable; the feet are not on the centerline of the treadmill's width when running, and uneven running of the feet may also lead to running. On the contrary, Xiao Bian found that many friends have uneven conditions when they are running. The running belt will naturally be on the side of the foot! 0049evycty6ny9nvent5f690

Treadmill run with how to do, how to debug?

For those people caused by running belt deviation phenomenon, do not deliberately to debug, just need to open the treadmill idling for a few minutes, the running opportunities will automatically return to normal; for those natural deviations, idle words can not be restored , then we need to do it ourselves or ask a professional to debug it. Here's how to debug the following:

First of all, you need to know which side the running belt is running to. If you say that the running belt is running to the right, then we turn the adjusting bolt on the right side of the treadmill clockwise, or rotate the adjustment bolt on the left side counterclockwise; If the running belt is running to the left, then we adjust the left adjustment bolt clockwise, or adjust the right adjustment bolt counterclockwise; here we should pay attention to whether it is adjusting the left or right adjustment bolt of the treadmill Do not adjust too much. Take a half-circle as an appropriate step-by-step adjustment until the running belt returns to normal! In addition, in order to reduce the failure rate of the treadmill, we must pay attention to the daily maintenance of the treadmill, such as the regular addition of lubricants between the running belt and the running board, so that we can better make our treadmill at the most Good condition!

Summary: For the adjustment of treadmill running belt, Xiao Bian thinks that it is still relatively simple. It only needs to be done by oneself. It does not need to be done in half an hour. In the end, we must tell everyone that if the running belt of the treadmill runs out To correct it in time, or damage to the run belt is very serious!

Recommended reading:

2000 yuan treadmill brand recommendation

2017 Comprehensive Training Device Top 10 Ultimate Selling List

Six cost-effective treadmill test recommendations

2016 Treadmill Top Ten Brand Authority Rankings

Enamel Potjie

Potjie is uniquely South African, and is a friendly food, to be enjoyed by rich or poor, young and old, city-dwellers and country folk, needing only one`s imagination when it comes to selecting the ingredients. Potjie is traditionally made around an open fire, preferably in the company of good friends, with one or more Potjies simmering away.
Get your friends and family together and cook a delicious meal in a potjie . It is an exciting and enjoyable way of relaxing together and a tasty alternative to a barbeque. The potjie is placed over hot coals, either on an open fire or on top of a grill.
You regulate the heat by moving the coals closer to or away from the pot. Its rounded shape collects the liquid in the bottom of the pot. You therefore need very little water and other liquids. The food becomes rich in taste - and healthy! EF Homedeco can serve you all the sizes of potjies: mini 1/8 1/4 1/2 3/4 1 2 3 4 6 8 10 14 20 25 30, from waxed seasoned finish to enamel coated, to make your life more enjoyable!

Enamel Potjie,Enamel Cast Iron Potjie,South African Potjie,Enamel African Mini Potjie

Shijiazhuang Ever Fresh Trading Co., Ltd. , https://www.everfreshcookware.com

Posted on