Environmental protection materials popular pulp molding is still "hibernation"

In order to integrate with the international market in packaging, many household electrical appliances are replacing honeycomb foam board with EPS foamed plastic liners and wooden pallets. After adopting pulp molding and honeycomb paperboard materials, it not only reduced the overall cost of packaging, but also helped to increase the company’s brand and image, reduced “white pollution”, and opened a “green channel” for the export of foreign trade enterprises. .

At present, the application of honeycomb paperboard materials in electromechanical product packaging is advancing by leaps and bounds. However, regarding the problems in the production and operation of pulp molded products, the market for pulp molded industrial products is still in a state of “hibernation” with poor results. Especially in the application of electronic product packaging, there is no honeycomb paperboard situation is good, the amount of use. Pulp molded products are only used in the packaging of electronic products and communication products with small size and light weight, such as mobile phones, telephones, fax machines, and printers. However, they have not yet been adapted to the current electronic product market mechanism. The large-scale, large-scale market is difficult to apply to the needs of home appliance product packaging.

What are the reasons? According to analysis by industry insiders, it is mainly due to our lack of innovation in the production of pulp molded products and a lagging passive situation in research and development.

It is understood that so far there is no pulp molding plant in China that can produce packaging products for televisions, rear projectors, computers, picture tubes and other products. Some home appliance manufacturers have also been looking forward to a good quality, reliable performance and reasonable price of pulp molded packaging products!

Enterprises are small in size, lack of management, research, development, and production capabilities. At present, the vast majority of paper pulp molding manufacturing enterprises are privately-owned enterprises, so on the whole, there are still unsatisfactory aspects in some aspects. For example, the scale of the company is not large, the technology level is low, the capacity for self-reliance innovation is weak, and the management level is not high. From the perspective of the external environment, private companies have poor financing channels, credit guarantee systems and risk investment mechanisms are not perfect, and social intermediary service systems are not perfect. Equipment and supporting mold manufacturing technology and technology lag. In the pulp molding production process, there are common problems of low efficiency, high energy consumption, and large supplies. In particular, the mold manufacturing method is backward and the model is small. Therefore, not only the variety is single, the cost is high, and the products often have quality problems, such as thin walls (poor suction), product regain (acidic operation), and poor buffering properties (raw materials Compatibility is unreasonable). The currently produced pulp molded articles have been subjected to a drop test, and it has been shown that the cushioning properties have been greatly reduced or even substantially lost (ie, poor elasticity) after being subjected to a self-percussion, and cannot withstand multiple drops or collisions. At the same time, it is difficult to produce large flat surfaces, high depths, and pulp molded products, which can not meet the demand for a large number of household electrical appliances such as televisions, rear projections, computers, kinescopes, and other electronic product packaging, which restricts pulp molding. Promote the healthy development of applications and industries.

Raw material quality standards are too low
Pulp molding has not yet issued national standards. Some manufacturers use raw materials whose quality standards are too low and directly affect the appearance color and surface quality of the products. Some manufacturers neglected the technical performance and index requirements of products such as flame-retardant, moisture-proof, anti-static, and anti-mite. Therefore, its products are also difficult to apply to market requirements for small household appliances such as electronic toys and gifts.

The poor awareness of business services is the guideline for the price, the quality is the guarantee, and the service is the cornerstone. This is the basis of the company's management. Some pulp molding companies are eager to achieve success, quick success, low management level, not only do not pay attention to product quality, exaggerating hype, shoddy, but also do not pay attention to after-sales service, product sales, problems, can not give users timely Helping and solving has caused some bad consequences and impacts.

Lack of policy guidance At present, China's pulp molding (industrial packaging products) equipment and products manufacturing enterprises have a strong momentum of development. At present, most of pulp molding production and applications are self-issued, and there are no mandatory policies and regulations for protection. Related technologies and equipment There are no special standards and regulations and policies issued by state authoritative departments. The government authorities also did not organize and properly guide the industry. In particular, in the current situation where the market economic order is still not very standardized, the competition has caused fierce competition and there is no rule to follow. Therefore, the industry has been scattered and disorderly. As the industry criticizes each other and devalues ​​each other, it is difficult to communicate and communicate, thus affecting the promotion and healthy development of pulp molding.