Small apartment apartment that costs 100,000 yuan for renovation needs to be reworked

Following the professional, a small apartment apartment with a cost of 100,000 yuan was inspected. The result is surprising. This hardcover room of less than 50 square meters has more than 10 problems such as tile empty drum, latex paint falling, and wallpaper splicing , and the decoration company needs to be reworked. Professionals said that compared with the rough room, there are more inspection items in the decoration room, but the problems usually appear in tiles, walls, wallpapers, etc. In addition to some inspection points that require professional tool testing, the owner can also perform self-tests on some simple inspection points during the decoration process, so that problems can be found in time and solved, and the problem of finding problems after the overall decoration is completed is avoided.

Simple check one: wall

Some owners will choose latex paint when decorating the wall. After the decoration company completes the spraying work of the wall latex paint, the owner can directly inspect the spraying of the wall surface by the naked eye.

According to reports, generally in the decoration, wall latex paint is often sprayed with a spray gun, according to the requirements of the spray point to be even and even, not allowed to have skin, falling phenomenon, hand touch paint film is smooth, no powder. The owner can touch the wall in the inspection room, feel smooth, and check if there is white powder on the hand. At the same time, observe whether the color of the wall paint is consistent from the side, pay attention to whether the wall surface has a phenomenon that the paint viscosity is too low and the coating is too thick to cause the latex paint to fall.

Simple check point 2: tile

The simple checkpoints of the tiles are appearance, flatness and empty drums. Among them, the appearance is to observe whether there is crack or porcelain on the brick surface; the flatness can be touched by touching the four corners of the "cross angle" in the middle of several adjacent tiles. If several corners are flat, it means that the tile flatness passes. Whether the wall tile is flat or not can be detected by a long ruler or a flat wooden board. For example, a ruler or a wooden board and a wall are close to each other, and the wall surface is flat.

To check if the tile has an empty drum, use a small hammer to gently tap the corners and the middle of the wall and floor tiles to see if there is a hollow sound. Professionals reminded that according to the relevant regulations, the tiles are not allowed to appear empty, otherwise they will fall off and there are potential safety hazards. It is found that the phenomenon of empty tiles in the tiles should be reworked and re-applied in time.

Simple checkpoint three: floor

The quality of the wooden floor directly affects the quality of living in the house. Therefore, wood floor acceptance is also an important part of the inspection process. The quality of the seam of the wooden floor surface layer should conform to the tightness of the gap, the joint position is staggered, the surface is clean, the joint is tight, the nail is firm, the glue is not overflowing, the plate arrangement is reasonable and beautiful, and the width of the rim is consistent.

If the laying is not satisfactory, there will be obvious gaps, uplifting, bowing and the like. The owner can check whether there are obvious gaps and unevenness when paving the wooden floor, whether the joint between the floor and the skirting board is tight, and walk slowly in each room to listen carefully to the sound of creaking.

Simple checkpoint four: wallpaper

The wallpaper decoration is not only simple and environmentally friendly, but also enhances the sense of the whole house during the decoration. Some owners will choose a unique wallpaper with a unique pattern as the TV background wall. If the paste is not in place, it will affect the overall room.

When checking the wallpaper, you can use the hand to touch whether the pasted wallpaper is flat, whether the bonding is firm, whether there are defects such as damage, hollow drum, curling, wrinkles, etc. In addition, it is necessary to check that the splicing of each piece of the wallpaper should be horizontal and vertical, the pattern is positive, and the pattern at the seam is consistent. There is no obvious seam at the distance of 1 m from the wall, the slanting at the corner is smooth, and the corner is not seamed. The angle is square and the edges are neat and free of burrs.

Professionals pointed out that the inspection of the above decoration rooms is relatively simple and easy to learn, but there are problems with ceilings, hydropower renovation, heating, gas, and so on. Professional tools are also needed for testing. Therefore, if you want to comprehensively check the quality of the decoration, It is recommended to hire a professional supervision company to conduct inspections.

Tags: veneer, wood-based panels, panels , top ten brands of Chinese plates

1) Disposable Face Mask package: 50pcs/pack, 1pack/inner box, 40 inner boxs/ctn, 2000pcs/ctn.

2) Disposable Face Mask certificates: CE, FDA 

Disposable Mask

Disposable Face Mask,3Ply Disposable Face Mask,Ce Fda Masks,Earloop 3-Ply Surgical Face Mask

Homefelt Houseware co.,ltd , https://www.dghomefelt.com