The error information and processing method in the process of PSPNT dispatching

Error message: "The dongle is invalid" when starting RIP

deal with:

1. Check whether the sentinel service in the "Device" in the "Control Panel" is started. This service does not work.

2. Check the parallel port mode in the BIOS. PSPNT recommends using the ECP parallel port mode.

3. If both of the above items are normal, it is possible that the dongle has been damaged and needs to be repaired. If there are other RIP dongles, they can be installed on the machine. If the RIP can be started and the key is invalid, the original dongle is damaged.

Error message: "The system parameter configuration is invalid" when starting RIP

deal with:

This error is generally caused by a problem with the system's network card installation. You need to check whether the TCP/IP protocol is installed in the network properties. If you still do not need to remove the network card driver and reinstall.

Error message: RIP output dot matrix time "serial error" or "connection error, requires checking photosetter and connection conditions"

deal with:

1. Check whether the login operating system user name has administrator rights.

2. Check if the device driver of the imagesetter has been started and the device driver does not start. The RIP and the imagesetter cannot be connected online. If it is the NT4 operating system, look for the imagesetter driver in the "Device" in the "Control Panel", where you can manually start the device service. If it is a WIN2000 system, it can be viewed in the "Driver" under "Software Environment" under "System Information" under "System Tools" in "Control Panel" - "Administrative Tools" - "Computer Management".

3. If it is an NT4 operating system, check whether the interruption of the RIP interface card is exclusive and require that the interrupt cannot be shared with other devices. Interrupts can be viewed in the operating system's windows NT diagnostics, or they can be seen on the computer's startup self-test screen. If there is a conflict in the interrupt, you can adjust it by adjusting the slot of the card, masking unused devices (such as sound cards, usb devices, etc.) in the BIOS, and specifying the interrupt of the card in the BIOS (some motherboards have this function).

4. If it is a WIN2000 system, the system can automatically allocate interrupts without manual adjustment. It should be noted that the “Device Manager” of “Hardware” in the “My Computer” property should be checked to see whether the Founder interface card is normal. If there is no error sign with a yellow exclamation mark, you need to update or reinstall the device driver. .

5, check the data line and photosetter settings.

Error Message: RIP Explained File PS File Times "Syntax Error undefined color..."

Processing: This error is generally related to the color setting. If the FIT generated PS file, check whether there is an object using the RGB color model or grayscale color model on the layout, and the color must use the CMYK color model.

Error message: RIP interprets PS file syntax errors or *.cid font errors

Solution: Check whether the Rising Real-time Monitoring System is installed on the host computer. Some versions of the virus-killing software may interfere with the normal operation of the RIP.

Error message: RIP interprets PS file Times "grammar explanation undefinedfilename ..."

Processing: This error is generally caused by the fact that RIP cannot open the picture file specified by the PS file normally. After selecting “Ignore missing word” in the parameter template, reinterpret the file to see if RIP can generate dot matrix and report the file name that failed to open. Find the path where the file is located and specify the correct path in the image search path of the parameter template. The path will output the PS file normally. If the specified file has the same name as the desired file, but the content is different, or if the modification time is different, syntax errors may sometimes be reported.

Error Message: RIP Interpreting PS File Times "Syntax Interpreting Wrong Stack Underflow..."

Processing: This error is generally due to a problem with the RIP font. Check if RIP does not reset the font, or if the installed font is not the font corresponding to the dongle.

Error Message: RIP Explains PS File Times "Wrong Syntax Explanation invalidfont_PSERROR"

Processing: This error is related to the font. RIP cannot correctly recognize the font information in the PS file.

1. Select "Ignore missing words" in the parameter template and reinterpret the file to see if RIP can generate dot matrix and report missing font or character information. If RIP reports an error message of missing a certain font or character, You need to check whether the RIP contains this font and whether it is installed correctly. If RIP does not have such a font, you need to modify the file in the front-end layout software.

2. If “Ignore missing word” is selected in the parameter template, RIP still reports “invalid syntax interpretation error font_PSERROR” when explaining PS file. There are two possibilities. One is that the fonts used in the PS file cannot be identified by RIP. This requires the use of layout software to check the layout of the fonts and layout settings. Another possibility is that RIP programs and fonts have problems and need to be reinstalled.

Error message: "Invalid key" was reported when starting RIP

deal with:

1. Check whether the key.txt file exists in the bin subdirectory of the RIP program directory. Check whether the file name is correct, whether the content of the key number is correct, and whether the file contains other characters (such as spaces, carriage returns, etc.).

2. If the network card is correct, the original key number will be invalid after the network card is replaced.

Error message: Start RIP Times "Pspnt.exe file is wrong..."

Remedy: Delete the files in the sysdata subdirectory and framebmp subdirectory of the RIP program directory, and then start the RIP test. If it can start normally, you can use the RIP normally after resetting the fonts. If it still cannot be started, you may need to retry. Install RIP. It should be noted that the file under the framebmp directory is the dot matrix file generated after RIP interpretation. If the page lattice path is modified in the RIP system parameters, the file under the corresponding path needs to be deleted when the file is deleted.

Error message: RIP Output Lattice Times "The system does not allow the output of such a page dot matrix."

Remedy: Check the resolution of the dot matrix and whether the width exceeds the allowable range. That is, the key file has a restriction to apply for a higher-grade key number.